Manual
 System Requirements

Back to top

System Requirements
The Dry Fire Online website has the following requirements:


The Camera App and the Laser Training have the following requirements:

 Limitations

Back to top

Camera App limitations

 How-to Start a Stage

Back to top

Realistically Scaled Targets
Most new shooters are surprised by how small a target is at 25 yards downrange!
It is important to train as realistic as possible, including the targets. E.g. if you want to train with a target that is 25 yards from you (target distance), the target on the screen should appear as small as a real target at 25 yards would be on the range.

Notice that all targets below have the same size from the shooter's point of view, no matter how big the screen is, or how far the shooter stands from the screen.


Back to top

Screen Diagonal Size This is the screen diagonal. It is nothing special, that's how the screen size is measured. If you have a flat screen TV it is probably written on the TV or on the package. If you have a projector, you can measure the projected image or the canvas. Just make sure the projected image is rectangular and projected onto a flat surface.


Back to top

Screen Distance The screen distance is how far you stand from the screen. Note the following:


Back to top

Shooter Eye Height The ‘shooter eye height’ is ideally the height of your eyes (viewpoint, camera, whatever) from the ground. Note the following:


Back to top

Set up the screen For the best experience switch your browser to full screen (instead of some windowed) mode. The center of the screen is ideally on the same height as the ‘shooter eye height’. In other words, when the shooter naturally looks ahead, the center of the screen is right in front of his face.
Dry firing from a prone position works best when the screen is placed on the ground. If you want to practice long distance shooting, you can put a notebook or a tablet in front of you, since the target silhouette will be small and can fit on a smaller screen.


Back to top

Mechanical offset
Dry Fire Online is a simulator and - just like any other simulators - it suffers from the mechanical offset (or height over bore or sight height) of your gun. There are some great articles available about this topic here and here, but a picture is worth a thousand words:

Example: You aim for the head of the target, that's where your Point of Aim (POA) is. Due to the mechanical offset the laser is going to appear below your POA - that's where the Camera App is going to detect the laser and register a shot, that's where the Point of Impact (POI) is. But that's not where you were aiming for.

You can deal with this problem by simply telling the simulator to register the shots NOT where the laser appears, but where your Point of Aims is, so the POA will be the same as the POI. See here how .

We do not recommend zeroing the physical sights of your firearm on the screen distance. It's okay if the laser appears below the center of your crosshairs.


Back to top

Zeroing, Sighting in

Zeroing: #1 The Manual Way

Zeroing: #2 The Intuitive Way


Back to top

 Range Screen

Back to top

Overview

The Range Screen is what appears when you click on Start Stage. This is the main training screen where the targets are displayed.


Back to top

Toolbar

The Toolbar is a row of buttons that influence the behavior of the Range Screen. The Toolbar consists of the following buttons


Back to top

 How-to Build a Stage

Back to top

Target Positioning Target positions are defined by 3 parameters:

Note also


Back to top

Target Alignment Keep in mind that in Dry Fire Online the targets are positioned by - and the target parameters define - the center of the target. If your stage description defines the relative target distances by edge-to-edge, then you have to transform it to center-to-center distances by considering the width of the targets. In this case it can be useful to change the unit of measure, for instance to define the values in inches instead of feet.


Back to top

Setup moving targets and waypoints If you change the target transition mode from 'static' to 'moving', you can define waypoints that describe the path of the target. For every waypoint you can define:

The distance of two waypoints and the time the target has to cover this distance defines the speed of the target. Currently there is no way to define the speed instead of the time, so if you want to precisely set the speed of the target, you have to do the math, and convert it to time.

When creating a complex path, you have to consider the Target Expose Time. It is defined in the stage header and it is the upper limit of how long a stage is displayed before the next round. Example: you have a target path with 3 waypoints, each with 10 seconds, means your target needs 30 seconds to reach the last waypoint. If the Target Expose Time is set to 20 seconds, then your target will never reach its last waypoint, since the stage terminates after 20 seconds.

After the last waypoint, you can define what the target should do when it reaches the last waypoint: If you want to make a target ‘wait’ for a certain amount of time at a waypoint, you can create a repeat the waypoint with the exact same parameters (create two waypoints with the same distances, height).


Back to top

Stage Builder
In the Stage Builder you can create new stages from scratch or change existing Quickstart or Shared stages.

Selecting Stage Builder on the menu bar displays the Stage Builder menu in an additional menu line.

The Stage Builder Menu contains the following options:


Back to top

Target Editor
In the Target Editor of the Stage Builder you can add, change and remove targets and waypoints.

Selecting Targets on the Stage Builder Menu displays the Target Editor Menu in an additional menu line and the Stage itself where you can click on the targets.

The Target Editor Menu contains the following options:


Back to top

Target Details
The Target Details panel provides a detailed insight into the properties of the selected target. The panel can be displayed / hidden by the

When a target is moved around on the stage, the Target Details panel automatically changes its position and automaticaly docks to the left or right side of the screen to avoid obscuring the target.

If you move the target to the left, the panel is going to jump to the right:

The Target Details panel can be scrolled up/down to display all properties.

Back to top

 Camera App Quick Setup Guide

Back to top

Overview


Back to top

Camera App Quick Setup Guide Video

Step 1) Download the DryFireOnline app on the Apple App Store or get it on Google Play

App Store Google Play

Try it for FREE: Unlimited stages and 2 shots (double tap) per round even without a subscription!

Step 2) Watch the videos below and learn more about the setup process. Find more tips and tricks in the How-To and Troubleshooting sections of the Manual.

What you need / System Requirements

Detailed Setup Guide (2023)

Screen Calibration

Laser Calibration

Quick Setup Guide (2020)


Back to top

More Videos

Reviews, tutorials and setup guides:


Back to top

What you need

Let’s check if you have everything required to train with the Camera App! You need:

Budget Philips Projectors on Amazon

Philips NeoPix Easy 2+, True HD projector with built-in Media Player
$79.99

Philips PicoPix Micro 2, pico projector, LED DLP, 5h Battery Life, HDMI, USB-C
$139.99

Philips NeoPix Ultra 2, True Full HD projector with Apps and built-in Media Play...
$64.99

Philips NeoPix Ultra 2+, True Full HD Projector With Android TV Dongle, Chromeca...
$174.99

Philips PicoPix Max Projector, Full HD with Android 9, Wi-Fi, Bluetooth, USB-C, ...
$349.99

Epson Projectors on Amazon

Epson, EPSV11H981020, PowerLite E20 3LCD Classroom Projector, 1 Each, White , 3....
$384.99

Epson, EPSV11H982020, PowerLite X49 3LCD XGA Classroom Projector with HDMI, 1 Ea...
$448.00

Epson EX3260 SVGA 3,300 lumens color brightness (color light output) 3,300 lumen...
$599.00

Epson Home Cinema 1080 3-chip 3LCD 1080p Projector, 3400 lumens Color & White Br...
$733.52

Epson EX7220, WXGA Widescreen HD, Wireless, 3000 Lumens Color Brightness, 3000 L...
$785.97

Phone stands and tripods

GripTight ONE Mount (Black)

Joby GripTight Smartphone/Action Camera Flexible Tripod Stand Kit, Black/Charcoa...
$34.81

ULANZI iPad Phone Tripod Mount Adapter with Cold Shoe, Universal Smartphone Tabl...
$15.95

Aluminum iPad Tripod Holder Mount - U-pad III 7.9-12.9in Metal iPad Tripod Adapt...
$45.95

Manfrotto Element MII Mobile Bluetooth 4-Section Carbon Fiber Traveler Tripod, B...
$187.73


Back to top

Example Range Setups

There are many ways to set up your Dry Fire Online range, here are a few examples:

1) The tablet range - small and portable Hey, there is a video about this one:

2) The notebook range Hey, there is a video about this one:

3) The tablet & projector range

4) The notebook & projector range

4b) Use your tablet as a camera

5) Large flat screen range


Back to top

Training Guns


Back to top

Our Lasers

Dry Fire Online is a laser training simulator - we do no produce our own laser cartridges because Dry Fire Online it was designed to work with any laser cartridge that fits your needs, gun and budget.
Still, there are differences between the lasers that are available on the market, and we receive many questions about the lasers we use. Here we share our personal experiences and subjective opinions - your experience and opinion may differ. Make your own research and choose the product that best fits your needs.


Back to top

iTarget and Mantis Pink Rhino 9mm

★ ★ ★ ★ ★

Both our iTarget and the Pink Rhino cartridges are 9mm chamber insert cartridges, but available in other calibers as well. Here is the iTarget:

Mantis Pink Rhino 9mm:

Spot the difference: iTarget vs Mantis Pink Rhino





Back to top

Laser Ammo SureStrike 9mm

★ ★ ★ ★ ☆


Back to top

Smart DryFireMag with Laser for Glock and Sig P320

★ ★ ★ ★ ★

Striker fired handguns, like Glocks or the Sig P320, don't have double strike capability. That means once the striker is under tension and the trigger is pulled, the firing pin can hit the cartridge one just once. Pulling the trigger repeatedly (without racking the slide and cycling the gun) cannot tension the firing pin spring again and hit the same cartridge multiple times - like double action handguns can do.

That's a big problem with laser training, because training with a simple laser cartridge (Pink Rhino, iTarget, SureStrike) means that the slide shall be manually racked after each shot. Training multi-shot scenarios requires to manually rack the slide after each shot, that makes the training cumbersome, slow and even builds the bad habit and training scars of racking the slide after each shot - which is unnecessary (or outright bad) in real life scenarios.

The company DryFireMag (not to be confused with Dry Fire Online) is known for their product line of trigger resetting magazines, including a laser capable version of their product: the Smart DryFireMag for Glocks and for the Sig Sauer P320.

We have tested the Glock version of the Smart DryFireMag with laser, and it wokrs well with with our Camera App, in fact, it became one of our favorites.




Back to top

CoolFire Trainer

★ ★ ★ ★ ☆

The CoolFire Trainer is a system that replaces the barrel of the pistol with a custom barrel that's essentially a CO2 tank. The barrel contains a piston, and when you pull the trigger, the piston can push back the slide, cycle the gun and reset the trigger. The kit comes with a tuned recoil spring, and if you would like to train with a laser, you can add a vibration activated laser to the barrel (remember: choose the red laser).

The heart of the system: the barrel, the spring, and an optional laser - here you see the laser with the Rapid Fill Adapter:

The CoolFire trainer is available for a variety of brands, including models of SIG, Glock, CZ, Walther, Canik, S&W, Springfield, ZEV, Tanfoglio and more! Here, it's installed in a Glock 17 with the laser module attached, being refilled with CO2 via the Rapid Fill Adapter:

Overall, the CoolFire Trainer is a pretty cool system. It comes with some major benefits, and some "good to know before you buy" features.

Pros:

Cons:

Rapid Refill Adaptor: at top is the laser, the bottom is the refill valve

Delivered in a nice portable organizer with all accessories: barrel, spring, laser, tools, seals, o-rings, silicon grease, all in one place:

The CoolFire Trainer is a great system, but only for power users. You can get it here:



Back to top

Mantis Blackbeard AR-15

★ ★ ★ ★ ★



Back to top

Laser Ammo Spider Adapter Kit

★ ★ ★ ☆ ☆




Back to top

Projector or Flat Screen

If you want to use the Camera App for laser training we recommend using a projector instead of a flat screen (TV, monitor, LED, LCD, etc) for the following reasons:

Budget Philips Projectors on Amazon

Philips NeoPix Easy 2+, True HD projector with built-in Media Player
$79.99

Philips PicoPix Micro 2, pico projector, LED DLP, 5h Battery Life, HDMI, USB-C
$139.99

Philips NeoPix Ultra 2, True Full HD projector with Apps and built-in Media Play...
$64.99

Philips NeoPix Ultra 2+, True Full HD Projector With Android TV Dongle, Chromeca...
$174.99

Philips PicoPix Max Projector, Full HD with Android 9, Wi-Fi, Bluetooth, USB-C, ...
$349.99

Epson Projectors on Amazon

Epson, EPSV11H981020, PowerLite E20 3LCD Classroom Projector, 1 Each, White , 3....
$384.99

Epson, EPSV11H982020, PowerLite X49 3LCD XGA Classroom Projector with HDMI, 1 Ea...
$448.00

Epson EX3260 SVGA 3,300 lumens color brightness (color light output) 3,300 lumen...
$599.00

Epson Home Cinema 1080 3-chip 3LCD 1080p Projector, 3400 lumens Color & White Br...
$733.52

Epson EX7220, WXGA Widescreen HD, Wireless, 3000 Lumens Color Brightness, 3000 L...
$785.97

Phone stands and tripods

GripTight ONE Mount (Black)

Joby GripTight Smartphone/Action Camera Flexible Tripod Stand Kit, Black/Charcoa...
$34.81

ULANZI iPad Phone Tripod Mount Adapter with Cold Shoe, Universal Smartphone Tabl...
$15.95

Aluminum iPad Tripod Holder Mount - U-pad III 7.9-12.9in Metal iPad Tripod Adapt...
$45.95

Manfrotto Element MII Mobile Bluetooth 4-Section Carbon Fiber Traveler Tripod, B...
$187.73


Back to top

Using a Flat Screen

Some advices if you decide to use a flat screen display for laser training

Can I train on my TV?

You can display the targets directly on most TVs. If your smart TV has a built-in internet browser just go to dryfireonline.com, or you can connect a laptop, notebook or game console to your TV, and use it to display targets. It works fine - without laser training.

However, the answer is more complicated if you would like to use your TV with laser training.
In this case, consider the following:

Source: YouTube


Back to top

Using a Projector

Some advices if you decide to use a projector for laser training


Back to top

Our Projectors

Since many of you asked our advice on choosing a projector we decided to write a few words about the projectors we use.

Please note that we are not expert on projectors, and the following is neither a buying advice nor a recommendation of any sort - it's just an introduction of the projectors we have and our experiences with them.

Budget Philips Projectors on Amazon

Philips NeoPix Easy 2+, True HD projector with built-in Media Player
$79.99

Philips PicoPix Micro 2, pico projector, LED DLP, 5h Battery Life, HDMI, USB-C
$139.99

Philips NeoPix Ultra 2, True Full HD projector with Apps and built-in Media Play...
$64.99

Philips NeoPix Ultra 2+, True Full HD Projector With Android TV Dongle, Chromeca...
$174.99

Philips PicoPix Max Projector, Full HD with Android 9, Wi-Fi, Bluetooth, USB-C, ...
$349.99

Epson Projectors on Amazon

Epson, EPSV11H981020, PowerLite E20 3LCD Classroom Projector, 1 Each, White , 3....
$384.99

Epson, EPSV11H982020, PowerLite X49 3LCD XGA Classroom Projector with HDMI, 1 Ea...
$448.00

Epson EX3260 SVGA 3,300 lumens color brightness (color light output) 3,300 lumen...
$599.00

Epson Home Cinema 1080 3-chip 3LCD 1080p Projector, 3400 lumens Color & White Br...
$733.52

Epson EX7220, WXGA Widescreen HD, Wireless, 3000 Lumens Color Brightness, 3000 L...
$785.97

Phone stands and tripods

GripTight ONE Mount (Black)

Joby GripTight Smartphone/Action Camera Flexible Tripod Stand Kit, Black/Charcoa...
$34.81

ULANZI iPad Phone Tripod Mount Adapter with Cold Shoe, Universal Smartphone Tabl...
$15.95

Aluminum iPad Tripod Holder Mount - U-pad III 7.9-12.9in Metal iPad Tripod Adapt...
$45.95

Manfrotto Element MII Mobile Bluetooth 4-Section Carbon Fiber Traveler Tripod, B...
$187.73


Back to top

Room Setup

The room where you setup your virtual range has an impact on your experience:


Back to top

Camera Position

You have to put down the camera somewhere before the screen, at latest before Screen Calibration:

Some examples:

Back to top

Connect

First, connect the Camera App to your training session

Back to top

Subscriptions and Promo Codes

You need a subscription to be able to train with the camera app.

Limited offer: Unlimited stages and 2 shots (double tap) per round even without a subscription!


A Free Trial with Free Cancellation is available. Use it to test the Camera App without spending any money. You are free to cancel your subscription before the end of the trial period.

In case you have an App Store Promo Code or Offer Code here is how to redeem it:

In case you do not have a Promo Code continue as follows:

Back to top

Subscription Levels

You can train as much as you want with any subscription level, but the number of laser shots - your “ammo” - is limited per round. Watch this video to see what it means:

Would you like to use Dry Fire Online for free without a subscription? Check out our Promotional Access program, if:


All subscriptions are auto-renew subscriptions with monthly prices. All prices are in USD. You price may vary depending on exchange rates and your local taxes.

How to subscribe in the Camera App:

Back to top

Cancelling Subscriptions

The payment and subscription process including all payments, renewals, cancellations and refunds are managed by your app store: Apple App Store or Google Play without the participation of Dry Fire Online.

In a nutshell: You send the subscription fee to Apple or Google and they forward it to us. Dry Fire Online doesn't see your name, billing address or credit card number.

If you would like to cancel your subscription, you have to take action.

Here is how to cancel your subscription:

In case you need further assistance with managing your subscriptions or you would like to request a refund, please get in touch with Apple or Google.

Back to top

Automatic Screen Calibration

Screen Calibration means that the Camera App needs to know where your screen is located. Luckily, there is a button for that.

Not so good:

If the automatic screen calibration fails:

Here a flower pot covers the bottom right corner of the green sceen.

And the calibration fails to detect the bottom right screen:

Then tap again on Auto Calibrate. If it still doesn’t work, use Manual Calibration (read below)

Back to top

Pitfall #1: Screen Calibration

Back to top

Manual Screen Calibration

In this case the top left corner was moved a bit downwards onto the correct corner.

Now it is Okay.

Back to top

Pitfall #2: Moving the Camera


This is the end of the Quick Setup Guide. If you have reached this point, the Camera App is ready to use.
You can start the stage on the Range Screen.

At the beginning of each stage, the Range Screen displays a special calibration screen and asks the Camera App to perform Automatic Exposure Calibration that is going to set the right exposure levels. Then you are ready to go!

Read the rest of the Manual in case you have issues like:

Back to top

Automatic Exposure Calibration

Exposure Calibration means that the Camera App needs to capture images where the laser dot is recognizable. The captured images shall be balanced and match the current lighting conditions: shall neither be too dark (no laser detected) nor too bright (false laser detected).
Luckily, there is a button for that.

Back to top

Testing the Laser Detection

Back to top

Manual Exposure Calibration

Example video about manual calibration:

Back to top

Scan Grid

The Scan Grid button changes the density of the laser scanning pattern. The denser the better the detection quality but also makes the scanning slower. You do not need to change this setting unless the "Frame Dropped" warning frequently appears.

Back to top

Laser Color

The Laser Color button changes the color of the laser the camera app is trying to detect. The default setting is red (for red laser), but it can be changed to green (for green lasers) that gives priority to the green RGB component.





Train

Back to top

Subscription

The details of the Subscription button are described here: Subscriptions and Promo Codes

Back to top

Sound

Back to top

Flinch


Back to top

 Troubleshooting

Back to top

When something doesn't work
If something does not work, try another browser, and make sure you do not use some old obsolete browser but a recent version. It is a good idea to use one of the well known browsers like Chrome or Safari instead of some lesser-known browsers like Opera. You can also check the System Requirements and the supported browsers.


Back to top

On the Stage Builder a message appears "If this message stays on the screen..."
In this case something does not work with your internet browser.


Back to top

Targets cannot be moved (tap and drag) on my tablet

Remember: You can always open the Details panel and change the target position manually.


Back to top

Cannot select/change an off-screen target

If you cannot click or tap on a target because the target is off-screen, you can use the Details button to display the target Details panel and then use the target selector arrows buttons to step among the selected target until the off-screen appears in the the Details panel. The properties of the target can be changed manually via the Details panel even if the target is off-screen.


Back to top

Stuck on the grey "Loading" screen
In this case something does not work with your internet browser.


Back to top

The Back button doesn't work
Your browser has a built in Back button, but besides that, Dry Fire Online also has a black Back button in the top left corner of the Range screen. Some internet browsers have issues (like Safari) might not go back properly if you click on the Back button OF THE BROWSER. In this case use the black Back button on the Range screen. The black Back button is also useful if you dry fire in full screen when the toolbar of your browser is hidden.


Back to top

The Pause button doesn't work
The Pause button does not immediately stop the current round, rather it stops one the current round is over at the Rang Counter pop-up. Check out how the Toolbar buttons work.


Back to top

The Flinch button doesn't work
The Flinch button on the Range Screen works only if Flinch Detection is activated even in the Camera App. Check out how the Toolbar buttons work.


Back to top

The Fullscreen button doesn't work
The Fullscreen button should work in the supported browsers (Chrome, Safari, Edge, Firefox) - please get in touch with us if you notice any problems using a supported browser. In other unsupported browsers it might not always work properly:


Back to top

The Audio button is missing
The Audio button on the Range Screen apperas only if you have selected some sound effects in the Stage Builder. Check out how the Toolbar buttons work.


Back to top

Audio Problems, no/missing/breaking sounds


Back to top

Target size is wrong, the target is not scaled properly


Back to top

Slow Connection warning appears


Back to top

I don't have a code (Connection ID) for the laser training

If you don’t know where to find the Connection ID that you have to enter in the Camera App, make sure the laser training is enabled before you start the stage: After you start the stage and confirm that your gun is unloaded, the Connection ID will be displayed in a popup and even at the bottom left corner of the screen. Use this number to connect the Camera App to the training session.


Back to top

Laser training code (Connection ID) doesn't work


Back to top

Screen Calibration failed

There are a few dos and don'ts in case you have problems with the Screen Calibration. First, that’s how Screen Calibration should work:




If that would happen, you can do the following:







Back to top

No laser detected, hits do not appear on the Range Screen


Back to top

No laser detected, Camera App screen goes dark during Laser Calibration

The Camera App might undercalibrate on some phones/tablets. If the Camera App screen goes dark during Laser Calibration and it doesn't register any shots, there's a simple workaround by manually adjusting the calibration settings. This video shows you how:


Back to top

False shots are detected, even when I do NOT shoot


Back to top

The laser is weak, battery low


Back to top

Precision is low, my shots are off

Back to top

 FAQ

Back to top

How much does it cost? Is it free?
The dryfireonline.com website can be used for free. Displaying targets on your computer screen, projector or TV, starting Quickstart stages, registration, using the Stage Builder to create, save and share your own stages - it’s all free!

You have to pay only if you would like to use our Camera App for laser training. Our prices are super affordable with free trial and free cancellation.
Find our current prices here.

Back to top

Why is it subscription-only?
The laser training is available only in a subscription based model and we have a few good reasons why:


Back to top

How can I subscribe?
Please read this chapter if you would like to start or learn more about the available subscriptions.

Back to top

How can I cancel my subscription?
Please read this chapter if you would like to cancel your subscription.

Back to top

Can I use Dry Fire Online on my tablet or smartphone?
Yes, you can use Dry Fire Online on any device that has a compatible web browser. On the other hand, the screen of tablets and smartphones is typically too small to display properly sized targets while leaving you enough distance in front of the screen to draw you gun, but tablets are OK for small portable setups.
Check out our tablet setup here.


Back to top

What devices are supported?
The Dry Fire Online website (to display targets) can be used on a number of devices including, notebooks, PCs, devices with an attached external screen or projector, smart TV’s, game console-s - basically on any device with a built-in web browser and a large enough screen.
The Camera App for laser training is available on Apple and Android smartphones and tablets.
Read here more about the possible combinations.


Back to top

What browsers are supported?
Dry Fire Online is tested with Safari, Google Chrome, Internet Explorer. Note that internet browsers are slightly different and some features might not be available in all browsers, like Dry Fire Online has some known problems with Internet Explorer 11 but it works fine with Internet Explorer Edge, the Back button works differently in Safari and Chrome, certain browsers have problems with audio playback and so on.


Back to top

Can I see where I hit the target?
You need to activate Laser Training and use our Camera App to get feedback about your shot placement.


Back to top

Can I use Dry Fire Online with laser training munition?
Yes, you can. You need to use our Camera App to get feedback about your shot placement.


Back to top

Can I use Dry Fire Online with IR (infrared) laser?
No, you can't. The Dry Fire Online Camera App works with common red and green laser cartridges.
The reason is simple: Dry Fire Online was designed to be as accessible and simple to use as possible. It uses the camera of common Android and Apple smartphones to detect the laser dot, without the need to buy a special IR capable external camera. Since most smartphone cameras can detect a simple visible red or green laser dot, but have issues with invisible infrared light, IR cartridges are not supported.


Back to top

Can I use my webcam for laser detection?
No you can't. Dry Fire Online was designed to be as accessible and simple to use as possible, so it uses the camera of commonly available Android and Apple smart phone to detect the laser. Just take your smartphone, put it down in front of your screen and it's going to work like a webcam. Laser Training works only with the Dry Fire Online Camera App that is available on Android and Apple iOS. It is not available on Windows, Mac OS X nor Linux.


Back to top

Can I use Dry Fire Online with scopes?
If you want to practice long range shooting with a scope, you are going to see the pixelated image of the target - depending on the distance and on the screen resolution it will be more or less usable. It is like watching TV via binoculars. You are not going to see more details, but you are going to see the pixels of the LCD panel. Note also that the focal distance is also much shorter since the screen is closer than the simulated target.


Back to top

Can I upload my range background photo or target images?
No, you can't. But you can send us a message if you would like us to add an additional target, or range photo to our collection.

 Promotional Access

Back to top

What is Promotional Access?
If you help us with the promotion of Dry Fire Online, you might get free access to Dry Fire Online and enjoy all Expert level laser training features - for free, without a subscription!

Back to top

Firearms Instructor Partner Program
Dry Fire Online has a pilot program for instructors and instructors can use the simulator for free.
Please note that the program is currently in experimental phase - no guarantees, it's limited to a certain number of participants and details might be changed in the future

Benefits:

Limitations:

Requirements and Application:

Back to top

Press Reviews
If you have a YouTube channel, firearm blog and would like to publish a review of Dry Fire Online, or if you’re looking for a new sponsor for your content get in touch with us!

Interested? Get in touch with us via our Contact form!

Back to top

Social Media Promoters
You’re not a Firearms Instructor or an Influencer? No problem! You can still get free access to Dry Fire Online! It's simple!

Send us the link where your content is published via our Contact form - conditions apply. We review the content you published and if everything is fine and then content is genuine, you get:

Back to top

Special Conditions
Participation in the Promotional Access program is not a right, but a privilege. Dry Fire Online reserves the right to refuse, reject, decline and revoke granting free access and to exclude any applicants from the Promotional Access program.

Guidelines:

 Terms of Use

Back to top

Terms of Use
The Terms of Use ("Terms") described in the sections below, govern the access to and use of the Dry Fire Online website and the laser training Camera App. You are allowed to use the Dry Fire Online website and the laser training Camera App ONLY if you fully understand, accept and agree to these terms.


Back to top

Firearm Safety
The creators of Dry Fire Online do not take any responsibility and are not liable for any damage, injury or death caused during dry fire or through the use of Dry Fire Online. Firearm safety is the user's responsibility. Firearm safety always comes first.

ALWAYS FOLLOW THE FIREARM SAFETY RULES!
Unload your gun before dry firing!

Here are some guidelines for safe dry fire practice:

Dry Fire Online does not provide firearm safety trainings. Users are expected to know, understand, agree and follow the Firearm Safety rules. For more information consult with your local firearm experts.

Back to top

Laser Safety
The creators of Dry Fire Online do not take any responsibility and are not liable for any damage, injury or death caused during dry fire or through the use of Dry Fire Online. Laser safety is the user's responsibility.


Back to top

User-Generated Content


Back to top

Privacy Policy


Back to top

Legal Disputes
In case of legal disputes the place of jurisdiction is the registered address of the creators of Dry Fire Online.